LUXAPOOL EPOXY PRIMER SEALER

LUXAPOOL Epoxy Primer Sealer is an integral part of the LUXAPOOL Epoxy Pool System where assurance
of optimum adhesion is sought for many pool surfaces.

Is a long proven solvent based, high solids, two part epoxy, designed specially to eliminate surface pin holes
and the ingress of water soluble salts which could lead to the blistering, flaking and peeling of the finish coat.

Is recommended as the first coat of the LUXAPOOL Epoxy Pool System for many pool surfaces including
new concrete, marblesheen, and old rendered surfaces.


 

USE AREAS:

As the first coat in the LUXAPOOL Epoxy Pool System for selective use in:

  • Swimming pools
  • Water tanks
  • Fish ponds
  • Aquaculture ponds.

BENEFITS:

  • Medium solids primer with good surface wetting.
  • Excellent adhesion to sound, but porous concrete, render and marblesheen surfaces.
  • Easy mix ratio via pre-pack quantities.

SURFACE PREPARATION:

Refer to the ‘LUXAPOOL Epoxy Application Guide’ specific to the specific type surface you wish to
paint/repaint.

APPLICATION:

Refer to the ‘LUXAPOOL Epoxy Application Guide’.

THINNING:

Thinning is not recommended.

DRY TIME/RECOAT TIME:

 

Normally touch dry in 8 hours. Should be trafficable within 12-24 hours, at which time it may be recoated with
LUXAPOOL Epoxy Pool Coating. Do not apply at temperatures below 15oC or above 30oC, or in humidity levels
exceeding 80%.

COVERAGE:

Approximately 25 - 30 m2 per 4L kit.

MIXING:

Ensure that the temperature of both components exceeds 15oC, ideally that it is between 15oc and 20oC.
Pour the entire contents of Part B into a solvent resistant plastic, or metal container. Add Part A to the Part B
can and stir thoroughly. DO NOT ALTER MIX RATIO/DO NOT USE PART CANS.

WORKING TIME:

Typically 1.5 hours per 4 Ltr kit at approx 25oC. Can be used longer in cool conditions, or much shorter
towards 30oC.

CLEAN-UP:

Clean all equipment with LUXAPOOL Solvent L.T. Low cost, but NOT cheap, rollers and brushes are not
recommended for re-use. Cheap rollers may show early fibre loss.

VER1406

 

pdf iconTO DOWNLOAD THE APPLICATION GUIDE LUXAPOOL EPOXY PRIMER SEALER AS PDF CLICK HERE!

 

The technical advice and/or application advice given in this publication represents the present state of our knowledge, and is believed to be reliable. Buyers and intended users of all Colormaker Industries products  should read the TDS carefully and then conduct their own assessment to confirm the suitability of the product, including in conjunction with other products, and the types of surfaces to, and the manner in which, the product will be applied. Colormaker Industries offers no warranty of performance based on the above information, either expressed or implied.