SURFACE PREPARATION 1. The render should consist of fresh cement and pure, clean sand only. Do not use any waterproofing agents or cement additives in the render (such as bonding agents) as this may affect the adhesive properties of the paint. Allow the render to cure for a minimum of 21 days prior to any [...]
OLD UNPAINTED CEMENT RENDERED POOLS SURFACE PREPARATION 1. Old pools must be completely drained before application so that thorough inspection can be made of the total surface area. Using a ‘notched hammer’ or similar, test for any evidence of unsound areas in the pool structure. Rectify any ground water intrusion before surface treatment. (Note: This may [...]
SURFACE PREPARATION 1. Using a stiff brush or broom, scrub the entire surface with diluted LUXAPOOL Concentrated Wash (mixed at a ratio of 500mL Concentrated Wash to 20L of warm water). This removes greasy contaminants such as sun creams, oils, body fats, etc. Pay particular attention to step areas and corners where oil accumulation may [...]
LUXAPOOL Poolside & Paving - PEBBLECRETE Application Guide (Download PDF) PEBBLECRETE SURFACES LUXAPOOL® Poolside & Paving is a water-based, decorative, P5 rated non-slip coating developed for use on swimming pool surrounds and decks. It is easy to apply and provides a durable surface suitable for use on pebblecrete, concrete, paved and timber surrounds as [...]